Elantra N Turbo Inlet
Elantra N Turbo Inlet
Elantra N Turbo Inlet
Elantra N Turbo Inlet

Elantra N Turbo Inlet

$337.00 AUD Sale • Save
Finish Uncoated

Requires a SXTH Element Intake

Fits the following vehicles:

  • Hyundai Elantra N 2022+ with SXTH Element Intake
  • Limited Lifetime Warranty available for original purchaser only.
  • See Terms and Conditions for additional warranty information.

Some products offered by SXTH Element and SXTHNK are not capable of shipping to states that have adopted the C.A.R.B. Standard. Those products can include anything induction or exhaust related. If this product is incapable of shipping to your location, you will not be able to checkout with it. More information can be found in the link below.

C.A.R.B. & E.P.A Information

Fits the following vehicles:

  • Hyundai Elantra N 2022+ with SXTH Element Intake
View the Installation Instructions for this product here

***Please note, this inlet ONLY fits our SXTH intake systems. If you have any other intake system, you will need to make your own adapter.***

The intake system of the N cars leaves a lot to be desired, so by increasing the size of the intake and turbo inlet, we can let the turbo ingest air easier resulting in better compressor pressure ratios that leads to more power, especially on tuned N's!

With gains up to 10whp on the OEM turbocharger our SXTH turbo inlet is the final piece to complete intake performance. The inlet is designed in our CAD software using 3D scans to ensure the best fitment and optimal flow. The inlet comes with a connecting coupler and new hardware for a complete, bolt-on installation to your SXTH Intake system



Our inlet is made of cast 6061 aluminum for an OEM fit and finish. Casting allowed us to keep the smooth transition from the intake to the turbo. At 3.75in entry, this inlet can allow for 400+ HP with ease.

VN Inlet TB side

The turbo side is matched to the compressor inlet and the machined faces ensure quality fitment with leak-free sealing.

VN Inlet turbo side

Customer Reviews

Based on 9 reviews
78%
(7)
11%
(1)
11%
(1)
0%
(0)
0%
(0)
S
Shaun

Great quality product however would advise anyone seeing this to make sure you clean yours with a dry cloth before installation, mine had a lot of gritty dust in the elbow assuming from the manufacturing process, something I assume you wouldn't want going through your turbo.

not the easiest install, took me about 1.5 hours, and i found it helpful to remove the battery to get to bolt on the firewall side with a long hex Allen socket. as others have said tape the bolts to the sockets and get a magnetic pick up tool.

J
JONNY
ELANTRA N OWNERS BE PREPAIRED MAKE SURE YOU HAVE EVERYTHING YOU NEED BEFORE INSTALL!

alittle Advice to any elantra N owners attempting this that i wish i would of know before hand

1. 1/4 FLEX HEAD STUB WRATCHET you need to drive the new hex bolt straight into your turbo
with out damageing the female threads on the turbo this is 100% needed in my opinion
i used a Flex head but mine was way too long & too big i used 3/8 drive when i should of use 1/4

2. your going to need a variety of diffrent length extentions
they sell packs of 1/4 extentions with a bunch of diffrent sizes
1-1/2 in--2 in--4 in--6 in--8 in--12 in. i ended up useing a 2 inch with an 8 inch
but the 1-1/2 would of been nice

3. UNIVERSAL JOINT SOCKET if you do not use one your never getting the bolt out from
the factory inlet and DEFENITLY not getting the new hex bolt in either
theres ZERO room as it is with factory then squeezing this bigger inlet in is even more challangeing
i used 1 joint but maybe 2 joints could help.

4. ELECTRICAL TAPE! your going to have to lightly but firmly tape
1 or possibly 2 of those hex bolts to your SOCKT WRENCH SETUP
i ended up tapeing a few of my joints on my set up and the
bottom hex bolt on the new inlet to get it started
so i could pull everything out without it comeing apart

3.ZIPTIE THE GASKET TO THE NEW INLET!
again just peace of mind

5. LONG STICK MAGNET forRemoveing the Stock Bolts from Stock inlet
i didnt have one at the time but wish i did would of helped alot

GOOD LUCK HOPE THIS HELPS!

GREAT PRODUCT
GREAT QUALITY
FAST DELIVERY
10/10 SXTH

Z
Zachary

Great

Load More

Fits the following vehicles:

  • Hyundai Elantra N 2022+ with SXTH Element Intake

You might also like