Veloster N (JSN) OTS Tune Bundle
How It Works
All tune files are considered Off The Shelf (OTS). This means that no updates are provided, no customization is available, and logs will not be reviewed. Once purchased, you will receive all files from the bundle with various options. Ensure that the tune matches the calibration ID read by your vehicle. No refunds will be issued if you purchase an incorrect file under any circumstance.
Important Requirements
Purchasing a tune requires owning an EK1 Device, BitBox, or Combi Loader.
⚠️ Ensure Your Calibration ID Matches ⚠️
Before purchasing, confirm your Calibration ID using your device. Flashing a mismatched ID can cause serious ECU damage.
Don't see your Calibration ID listed?
Couldn't load pickup availability
Hyundai Veloster N OTS Tune Bundle
Experience tailored performance enhancements designed specifically for your Veloster N. Unlock more power, torque, and responsiveness with our expertly crafted OTS tunes.
What's Included in Each Bundle
Stage 1
- With Pop
- Without Pop
Stage 2
- With Pop
- Without Pop
- E30 Variant
Note: Stage 2 requires a high-pressure fuel pump. If run with the Elantra N turbo (28231-2GTE0), it can achieve similar power to the Elantra N.
Stage 3
- With Pop
- Without Pop
- E30 Variant
Note: Stage 3 setup is similar to Kona N and Elantra N, as it requires a hybrid turbocharger (like the S-400).
Stage 1
Ideal for a stock turbo Veloster N.
Stage 2
Step up in performance with required HPFP and recommended intake, inlet, and intercooler.
Stage 2 E30
Enhanced performance using E30 blend.
Stage 3
Maximum performance with hybrid turbo setup.
Stage Details
Select a stage above to see detailed information.
Specifications Table
| Stage | Mod Requirements | Boost Level | Timing Level |
|---|---|---|---|
| Stage 1 | Stock | 19-20 PSI dropping to 14 PSI at redline | Up to +2° |
| Stage 2 | High-Pressure Fuel Pump | 23 PSI dropping to 14 PSI at redline | Up to +3° |
| Stage 2 E30 | HPFP + E30 Compatibility | (Similar or slightly higher than Stage 2) | Up to +5° |
| Stage 3 | Hybrid Turbo (e.g. S-400), Intake, Intercooler, HPFP, Additional Fueling | (As per hybrid turbo specs) | Up to +5° |
All files require a minimum of 91 octane. Files marked with E30 require ethanol 30%.
Frequently Asked Questions
Q: Can you customize these based on logs?
A: No, we are not performing customization.
Q: I have an EK1, what do I need to do to flash this?
A: Download and apply a patch from ek1tuning.com, then download our file and use the EKP converter linked above. If you need an EKR, you will need to convert on ek1tuning.com.
Q: Is power guaranteed?
A: No, power is measured under ideal conditions with maximum timing (no timing retard).
Q: I think I am having an issue with my tune, what should I do?
A: We can look into the problem, but these files are tested on a variety of vehicles, so it may be mechanical. We are not able to diagnose mechanical problems.
General Process for Using SXTH Element OTS Tunes
1. Purchase Your Tune Bundle
Visit sxthelement.com and select the OTS tune bundle for your vehicle. Complete your purchase.
2. Download Your Files
After checkout, you will receive an email with a link to download the `.bin` files included in your bundle.
3. Prepare Your Vehicle
Ensure your ECU has been properly patched if using an EK1 device. Visit ek1tuning.com if you need assistance.
4. Select Your Device
Use the `.bin` files with your BitBox/Combi Loader device or convert to `.ekp` for EK1 devices.
Important: The latest EK1 software update requires that users convert their EKP files to EKR. This must be done on EK1tuning.com.
5. Flash the Tune
Load the appropriate file onto your vehicle’s ECU via your device.
6. Enjoy the Results
Experience optimized power, torque, and drivability tailored for your Veloster N.
Ready to Transform Your Drive?
Purchase your OTS Tune Bundle today and unleash the full potential of your Veloster N.