Veloster N / Kona N Carbon Fiber Intake - Spare Hardware Pack

Veloster N / Kona N Carbon Fiber Intake - Spare Hardware Pack

$45.00 USD Sale • Save

(These are not required for new purchases)

Fits the following product:

  • Veloster N / Kona N Carbon Fiber Intake (14-03-103)
1 of 97400A101 | Stainless Serrated Flange Locknut, M6 x 1 mm, 1 of 5463K596 | Plastic Barb Fitting - 3/8" Tube ID - 90deg, 3 of 5416K42 | Worm-Drive Clamp - 3-5/16" to 4-1/4" Clamp ID (84-108mm), 1 of 5416K23 | Worm-Drive Clamp - 2-5/16"- 3-1/4" Clamp ID, 3 of 93475A230 | Stainless Washer - M4 - 4.3 mm ID - 9 mm OD, 1 of 1061T136 | Silicone Grommet - 3/4" Hole, 1/8" Thk, 1/2" ID, 1 of 9600K34 | Grommet - 1/2" Hole, 3/32" Thk, 3/8" ID, 3 of 91292A118 | Stainless SHCS - M4 x 0.7 - 16 mm, 3 of 94645A101 | Steel Locknut - M4 x 0.7 mm, 1 of 5463K214 | Plastic Barb Fitting - 1/2" Tube ID - Straight, 1.25 of 1120A212 | Chassis Protector, 1 of 9232K14 | Vibration Mount - Stud/Insert - Rubber - M6 Thread - 1/2" High, 1 of 98424A350 | Washer - M6 - Countersunk - Steel Zinc, 1 of 92125A236 | FHCS - M6x1 - L=12mm

WARNING: May contain items that are found to have compounds and/or chemicals known to the State of California to cause cancer, birth defects, and reproductive harm.

For more information, please visit www.P65Warnings.ca.gov

Spare Hardware Packs

(These are not required for new purchases)

Not everything can go according to plan. You may end up breaking a bolt or a bracket in the process of installation. You may need spare hardware packs for a second hand product that someone didn't take out correctly. We have you covered with hardware packs for nearly all of our products now. We may not be able to help you find that 10mm socket, but we can get the hardware pack to you for when it decides to rear it's head again.

You might also like