$150.00
Share

Focus ST Accessport ECU Calibration

(No reviews yet) Write a Review
SKU:
29-13-800

Vehicle Fitment if Applicable
Ford Focus:
ST 2013-2018
Add to Cart

Options

$150.00
Or

Frequently Bought Together:

Focus ST Accessport ECU Calibration
Inc. Tax
Ex. Tax

Info

SKU:29-13-800

Info

SKU:
29-13-800

Vehicle Fitment if Applicable
Ford Focus:
ST 2013-2018

Warranty

No warranty available (click here for all warranty information)…

Warranty

Description

ECU Calibrations are designed for your stock or moderately modified Focus ST.

What to Expect


This ECU Calibration is guaranteed to get you a great increase over stock power levels (individual results may vary), as well as the following improvements:


  • Better throttle response
  • More power under the entire power curve (see dyno sheets)
  • No effects to gas mileage (as long as you can keep it civil!)

How do we do this?

  • Air/Fuel Ratio adjustments
  • Ignition Timing optimization
  • Engine Load Map adjustments
  • Throttle control maps adjusted
  • Torque/Load limiters adjusted for power
  • All factory safety limiters retained

Your vehicle must be in good, working condition. We reserve the right to cancel or adjust the timeframe for any customer with a vehicle not in such condition. We may ask prior to scheduling for proof of condition. We cannot and will not calibrate a vehicle that does not run well. There is no "calibrating around it". We will not make suggestions for repairs if it does not run well prior to calibrating. You will need to consult a local shop for repairs.

Requirements and Suggestions

Upgrade Stage 1
91/93 Octane Fuel Required
  1. You can purchase a Cobb Accessport here.
  2. Once you have the Cobb Accessport in your cart you can also add the Staged calibration to your cart as well and follow the purchase process.
  3. Fill out the form that follows your purchase to enter yourself into our Calibrations Database.
  4. Once you receive your equipment and install the Accessport on your vehicle, email ecmdev@sxthelement.com with the Subject line "(Your Name) - (Order Number)".
  5. During predetermined timeframes we will work with you between logging sessions to get your calibration setup.
  1. Purchase the Staged calibration from this page.
  2. Fill out the form that follows your purchase to enter yourself into our Calibrations Database.
  3. Once your equipment is installed, email ecmdev@sxthelement.com with the Subject line "(Your Name) - (Order Number)".
  4. During predetermined timeframes we will work with you between logging sessions to get your calibration setup.
Stage 1 Calibration

Designed for light or moderately modified setups. We extract a significant amount of power from the engine using your current modifications. Along with the gains, we smooth the torque curve for more consistent acceleration all while maintaining conservative boost levels on the stock turbo.

Jetta GLI Graph

ECU Calibrations are designed for your stock or moderately modified 2019+ Jetta GLI.

What to Expect

This ECU Calibration is guaranteed to get you a great increase over stock power levels (individual results may vary), as well as the following improvements:


  • Better throttle response
  • LSPI (Low Speed Pre-Ignition) optimization adjustments
  • More power under the entire power curve (see dyno sheets)
  • No effects to gas mileage (as long as you can keep it civil!)
  • Pairs well with additional upgrades through available limiter overhead

How do we do this?

  • Air/Fuel Ratio adjustments
  • Ignition Timing optimization
  • Engine Load Map adjustments
  • Throttle control maps adjusted
  • Torque/Load limiters adjusted for power
  • All factory safety limiters retained

Your vehicle must be in good, working condition. We reserve the right to cancel or adjust the timeframe for any customer with a vehicle not in such condition. We may ask prior to scheduling for proof of condition. We cannot and will not calibrate a vehicle that does not run well. There is no "calibrating around it". We will not make suggestions for repairs if it does not run well prior to calibrating. You will need to consult a local shop for repairs.

Requirements and Suggestions

Upgrade Stage 1
91/93 Octane Fuel Required
  1. You can purchase a Cobb Accessport here.
  2. Once you have the Cobb Accessport in your cart you can also add the Staged calibration to your cart as well and follow the purchase process.
  3. Fill out the form that follows your purchase to enter yourself into our Calibrations Database.
  4. Once you receive your equipment and install the Accessport on your vehicle, email ecmdev@sxthelement.com with the Subject line "(Your Name) - (Order Number)".
  5. During predetermined timeframes we will work with you between logging sessions to get your calibration setup.
  1. Purchase the Staged calibration from this page.
  2. Fill out the form that follows your purchase to enter yourself into our Calibrations Database.
  3. Once your equipment is installed, email ecmdev@sxthelement.com with the Subject line "(Your Name) - (Order Number)".
  4. During predetermined timeframes we will work with you between logging sessions to get your calibration setup.
Stage 1 Calibration

Designed for light or moderately modified setups. We extract a significant amount of power from the engine using your current modifications. Along with the gains, we smooth the torque curve for more consistent acceleration all while maintaining conservative boost levels on the stock turbo.

Jetta GLI Graph

Customers Also Viewed